Castalia S.r.l.
tel. +39.2.26681083
fax. +39.2.26681876
info@steelchecks.com
ITA - ENG


SARGON - REAL CASES


Using Sargon you can model very different types of structures: civil, industrial, naval or mechanical. In this page some models made up using Sargon are listed, both by Castalia srl itself and by its Customers (in alphabetic order).


In the picture on the right the sargon model of the cruise ship Silver Whisper: length overall 203m, total height 36.1m, maximum width 28.8m. Number of decks: 12+1, displacement 23985t. The model has been used both for the analysis of the ship under the design-wave, and for the frequency analysis.

The model has been prepared by Eng. Paolo Rugarli (Castalia srl) in behalf of Studio Engineering srl.

cruise ship modelled by Sargon
Sargon model (wireframe view) of a steel delta shaped tower, Costarica work-order, 230 KV electric transmisison line, one circuit, double conductor. The tower is 38 m high. The structure has been tested under design loads confirming the elastic displacements computed using SARGON.

DESIGN: COLOMBO SPA - STEEL CONSTRUCTIONS, Casnate con Bernate (CO) - Italy - tel. +39-31-306880

tower for electric lines modelled by sargon
Solid view of a Sargon model of a steel tower trunk-pyramidal, Costarica work-order, 230 KV electric transmission line, double circuit, double conductor. The tower is 48.3 m high. The structure has been tested with design loads confirming the elastic displacements computed using SARGON.

DESIGN: COLOMBO SPA - STEEL CONSTRUCTIONS, Casnate con Bernate (CO) - Italy - tel. +39-31-306880

tower for electric lines modelled by sargon
Thermoengineering - KPOBV - elevated vent and the derrick of Karachaganak Development Project. Derrick and Riser da 18'' - 16''.

Height 70m, double strands order. Standards: BS-5950 for the derrick , ASME B31.2 for Riser, BS-CP3 for wind: Chap. V: part 2.

STRUCTURAL DESIGN checks and computing account by Eng. Paolo Gustin, GP srl.

antenna tower with cable strays modelled by sargon
Thermoengineering / SNAM Progetti - JOSE' FIRST FERTILIZER PROJECT - Elevated granulation vent of Josč First Project Granulation Vent - Venezuela.

Sargon model of a self-standing chimney height 55m, diameter 3514mm. Standards: AISC-ASD for the structural checks, ASCE standard for wind actions, UBC and local norms for seismic checks.

STRUCTURAL DESIGN, computations account and checks by Eng. Paolo Gustin, GP srl.

self standing chimney modelled by sargon
Self standing warehouse used as refrigerating unit at the temperature of -25°C having a 34m height, a 72m length, and a 22m width. (...)(global wireframe views)

Design and construction: PONTEGGI DALMINE S.P.A. (now MARCEGAGLIA Buildtech srl) - Via G. della Casa, 12 Tel. +39-(0)2-307041 - Eng. Fiorello Sist and Eng. Andrea Fraschetti .

self standing warehouse modelled by Sargon
(continue) The plant is characterized by double entry porta pallet scaffolds spaced by n°3 aisle, served by n°3 automatic translo-elevators. The Sargon model is made up of 9882 beam elements and 29808 degrees of freedom.

(partial view, wireframe and solid)

Designers: Eng. Fiorello Sist and Eng. Andrea Fraschetti. PONTEGGI DALMINE S.P.A. (now MARCEGAGLIA Buildtech srl) Via G. della Casa, 12 Tel. +39-(0)2-307041

porta pallet scaffold
Computing model used for the design and the structural checks of the external covering, the service-structures and the connecting pipe racks relative to regenerated-steam generator (GVR) having horizontal axis with natural flow, placed into a 380MW combined cycle downstream 250 MW power gas turbines, installed in Italy (wireframe view).

STRUCTURAL DESIGN: Eng. Roberto Rambaldini, WALLEY DESIGN Srl, via Unitą d'Italia 2, 21057 Olgiate Olona (VA)

regenerated steam generator modelled by sargon
Computing model used to check the structures of another GVR of another power plant, also realized in Italy (solid view).

STRUCTURAL ANALYSIS: Eng. Roberto Rambaldini, WALLEY DESIGN Srl, via Unitą d'Italia 2, 21057 Olgiate Olona (VA)

regenerated steam generator modelled by sargon
New south Europe NATO offices. Final design (solid view office building).

Sargon Model realized in behalf of Studio Arnaboldi & Partners

New South Europe NATO Offices (AFSOUTH), model by Sargon

page 2 ⇒


 


PRODUCTS:

C.S.E.

Sargon

Samba

 
 
 
 
 
 
 
 
SiteLock