|
|
|
SARGON - REAL CASES
Using Sargon you can model very different types of structures :
civil, industrial, naval or mechanical. In this page some models made up using Sargon are listed,
both by Castalia srl itself and by its Customers (in alphabetic order).
|
In the picture on the right the sargon model of the cruise ship
Silver Whisper: length overall 203m,
total height 36.1m, maximum width 28.8m. Number of decks: 12+1, displacement 23985t.
The model has been used both for the analysis of the ship under the design-wave, and for the
frequency analysis.
The model has been prepared by Eng. Paolo Rugarli (Castalia srl) in behalf of StudioEngineering srl.
(www.studioengineering.it ).
|
 |
 |
Sargon model (wireframe view) of a steel delta shaped tower, Costarica work-order, 230 KV
electric transmisison line, one circuit, double conductor. The tower is 38 m high. The structure has been
tested under design loads confirming the elastic displacements computed using SARGON.
DESIGN: COLOMBO SPA . STEEL CONSTRUCTIONS, Via Pannilani 22B, 22100 Como - Italy - tel. +39-(0)39-31-308220
nebco@tin.it
| |
|
Solid view of a Sargon model of a steel tower trunck-pyramidal, Costarica work-order, 230 KV
electric transmission line, double circuit, double conductor. The tower is 48.3 m high. The structure
has been tested with design loads confirming the elastic displacements computed using SARGON.
DESIGN: COLOMBO SPA . STEEL CONSTRUCTIONS, Via Pannilani 22B, 22100 Como - Italy - tel. +39-(0)39-31-308220
nebco@tin.it
| |
|
Thermoengineering - KPOBV - elevated vent and the derrik of Karachaganak Development Project.
Derrick and Riser da 18'' - 16''.
Height 70m, double strands order. Standards: BS-5950 for the derrick , ASME B31.2 for Riser, BS-CP3 for wind:
Chap. V: part 2.
STRUCTURAL DESIGN checks and computing account by Eng. Paolo Gustin, GP srl.
| |
|
Thermoengineering / SNAM Progetti - JOSE' FIRST FERTILIZER PROJECT - Elevated granulation vent of Josč First
Project Granulation Vent - Venezuela.
Sargon model of a self-standing chimney height 55m, diameter 3514mm. Standards: AISC-ASD for the structural checks,
ASCE standard for wind actions, UBC and local norms for seismic checks.
STRUCTURAL DESIGN, computations account and checks by Eng. Paolo Gustin, GP srl. | |
|
Self standing warehouse used as refrigerating unit at the temperature of -25°C having a 34m height,
a 72m length, and a 22m width. (...)(global wireframe views)
Design and construction: PONTEGGI DALMINE S.P.A. (now Marcegaglia Buildtech srl) - Via G. della Casa, 12 Tel. +39-(0)2-307041 - Eng. Fiorello Sist and Eng. Andrea
Fraschetti .
www.ponteggidalmine.it .
| |
|
(continue) The plant is carachterized by double entry porta pallet scaffolds
spaced by n°3 aisle, served by n°3 automatic translo-elevators.
The Sargon model is made up of 9882 beam elements and 29808 degrees of freedom.
(partial view, wireframe and solid)
Designers: Eng. Fiorello Sist and Eng. Andrea Fraschetti. PONTEGGI DALMINE S.P.A. (now Marcegaglia Buildtech srl) Via G. della Casa, 12 Tel. +39-(0)2-307041
www.ponteggidalmine.it . | |
|
Computing model used for the design and the structural checks of the external covering, the service-structures
and the connecting pipe racks relative to regenerated-steam generator (GVR) having horizontal axis
with natural flow, placed into a 380MW combined cycle downstream 250 MW power gas turbines, installed in Italy (wireframe view).
STRUCTURAL DESIGN: Eng. Roberto Rambaldini via Unitą d'Italia 2, 21057 Olgiate Olona (VA)
posta@studio-rambaldini.com | |
|
Computing model used to check the structures of another GVR of another power plant,
also realized in Italy (solid view).
STRUCTURAL ANALYSIS: Eng. Roberto Rambaldini via Unitą d'Italia 2, 21057 Olgiate Olona (VA)
posta@studio-rambaldini.com | |
|
|
| |
|
|
continue--> |
|
|
|
 |
|
home
